HP Rack Storage/12 Installation Manual page 16

Chapter 1
Configuration Switches
The bank of four switches configures the HP Rack Storage/12 for non-cluster or
cluster environments.
The switches are set Left or Right. The default switch setting is Left for all
switches. The description of each switch follows:
Switch 1: Selects cluster configuration. This switch has effect only when
two RS/12 SCSI cards are installed.
Set Left for non-cluster operation.
Set Right for cluster operation.
Switch 2 is reserved.
Switch 3 is reserved.
Switch 4 is reserved.
Configuration Switch Settings
The configuration switches take effect when the HP Rack Storage/12 is powered
on. Changing the switch settings after power on does not change the HP Rack
Storage/12 configuration. The configuration is saved in memory and cannot be
changed until power is cycled.
10
HP Rack Storage/12 Overview