Dab Reception - Yamaha TSX-112 Owner's Manual

Desktop audio system
Hide thumbs Also See for TSX-112:
Table of Contents

Advertisement

TROUBLESHOOTING

DAB reception

Problem
Cannot tune into any DAB
stations.
The initial scan operations
are not successful and "Not
found" appears on the DAB
information display.
The DAB station reception is
weak.
There is noise interference
(e.g. hiss, crackle or jitter).
The DAB station information
does not appear or is
inaccurate.
FM reception
Problem
Too much noise during
stereo broadcast.
Even with an outdoor antenna,
radio wave reception is weak.
(Sound is distorted.)
22
En
Cause
The initial scan operations were not
performed.
There is no DAB coverage in your area.
The DAB signals are too weak.
The DAB signals are too weak.
There is no DAB coverage in your area.
The DAB signals are too weak.
The antenna needs to be repositioned.
The DAB signals are too weak.
The DAB station may be temporarily out
of service, or the DAB station
information is not provided by the DAB
broadcaster.
Cause
The antenna may be connected
improperly.
The radio station you selected may be far
from your area, or the radio wave
reception is weak in your area.
Multipath reflection or other radio
interferences may have occurred.
Solution
Perform the initial scan operations
(☞ P. 10).
Check with your dealer or WorldDMB
Online at "http://www.worlddab.org" for a
listing of the DAB coverage in your area.
Change the height, direction, or placement
of the antenna.
Check with your dealer or WorldDMB
Online at "http://www.worlddab.org" for a
listing of the DAB coverage in your area.
Change the height, direction, or placement
of the antenna.
Contact the DAB broadcaster.
Solution
Make sure the antenna is connected
properly (☞ P. 4).
Try manual tuning to improve the signal
quality (☞ P. 13) or use a multi-channel
outdoor antenna.
Change the height, direction, or placement
of the antenna.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents