Installing The Batteries - Panasonic VAS 6150 Startup/Unpacking Instructions

1. VAS 6150
2. Docking station for VAS 6150
3. Power supply for VAS 6150
4. Country specific mains cable
5. Battery pack for VAS 6150 (without figure)
6. Diagnostic radio head VAS 5054A
alternatively diagnostic interface VAS 5055 without radio communication with
permanently
connected USB cable
7. USB cable for VAS 5054A
8. CDs for Windows XP and Windows Vista
9. Documentation in paper form
documentation links and recovery instructions and operating manual for port replicator)
4

Installing the batteries

Insert the provided battery pack, if supplied separately, into the tester.
Caution!

Only trained personnel may change the batteries.

Never short circuit the battery.

Never throw the battery into fire.

Dispose of/recycle the battery only in empty condition, in accordance with the local regulations.
Reverse the VAS 6150 (see figure), press and hold the "Push" mark. Slide and remove the
cover. Now push the battery pack into the compartment, until it securely fits the connector.
Slide the cover back.
Caution!
Make sure the latch is securely locked. Otherwise the battery pack may fall when you
carry the computer.
For further details see the Panasonic CF-52 instruction manual.
Startup /unpacking instructions VAS 6150 V 1.00
All rights reserved
VAS 6150 – Diagnostic – Laptop
___________________________________________
(operating manual for Panasonic CF-52, startup and unpacking instructions,
(not required for the operation of VAS 6150)
11 - 17