When Messages Appear On Screen; Section V Care Of Your Machine; Care Of Your Machine - Janome Harmony 8100 Instruction Book

When Messages Appear on Screen

The visual touch screen shows "Bobbin winding"
condition.
After the bobbin is wound, return the bobbin winder
to its original position by moving the spindle to the
left.
Raise the needle bar by pressing the up/down needle
button.
Turn off the power switch, and insert the Memory
Card again.
Stop operating the machine until this message
disappears (about 15 seconds).
Contact your Janome outlet.
This screen indicates the needle thread has run out or
has broken.
Turn off the power switch and rethread the machine.
SECTION V

CARE OF YOUR MACHINE

Care of Your Machine
The Harmony 8100 has been meticulously designed
and manufactured to give you a lifetime of trouble-free
sewing. The machine never needs oiling but the
bobbin area and hook race should be cleaned after
completion of every garment. Do not store the
machine in a high-humidity area, near a heat radiator
or in direct sunlight. Clean the outside of the machine
with a soft cloth and neutral soap. Press the up/down
needle button to raise the needle and unplug the
machine before cleaning.
55