Distorted Pattern (Model Next 40, 30 Only) - Janome 15822 Servise Manual

MECHANICAL ADJUSTMENT

DISTORTED PATTERN (MODEL NEXT 40, 30 ONLY)

TO CHECK:
IF THE STRETCH STITCH PATTERNS ARE DISTORTED WITH SETTING THE STITCH LENGTH
DIAL AT "S.S.".
(IN CASE OF BEING A DIFFERENCE BETWEEN FORWARD FEEDING AND BACKWARD
FEEDING DURING STRETCH STITCH PATTERNS), MAKE AN ADJUSTMENT AS FOLLOWS:
ADJUSTMENT PROCEDURE:
1. REMOVE THE CAP.
2. SET THE PATTERN SELECTOR DIAL AT "
DIAL AT "S.S.".
3. TURN THE STRETCH STITCH ADJUSTING SCREW IN THE DIRECTION OF (C)
WHEN A > B, OR IN THE DIRECTION OF (D) WHEN A < B.
4. MOUNT THE CAP.
, "AND THE STITCH LENGTH
(C)
21
(D)
STRETCH STITCH
ADJUSTING SCREW