Pre Out Connections - Kenwood VR-7070 Instruction Manual

Setting up the system

PRE OUT connections

This receiver has additional preout jacks. These can be used for various purposes, but will need to be connected to an external power amplifier as shown
in the example below.
L
R
ROOM B
• Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker.
• To use the PRE OUT jacks, press only the SPEAKERS A key to the ON position.
• If you choose "6ch AMP SB", sound will be heard from the PRE OUT Surround Back Left speaker (monaural) only.
• This connection is available for listening in ROOM B.
16
EN
CENTER
FRONT SURROUND SURROUND SUB
BACK WOOFER
PRE OUT
Center speaker
Power amplifier
Subwoofer
Power amplifier
Surround Back
speakers
Power amplifier
Surround speakers
Power amplifier
Front speakers
Power amplifier