Table of Contents
Advertisement
Setting up Your px2-300d Network Storage
Connecting the px2-300d Network Storage to Your
Network
Check Package Contents
Verify that the box contains the following items:
1.
px2-300d (models may vary)
2.
Power Adapter and Cord
3.
Quick Start Guide
4.
Ethernet Cable
Package contents may vary.
Connecting the px2-300d
If you have purchased more than one px2-300d, complete all steps on one device before setting up
additional devices.
1.
Make sure at least one hard drive is installed in the px2-300d. Refer to
http://support.lenovoemc.com for a list of drives approved for use with the px2-300d.
2.
Use the included network cable to connect the px2-300d to your network router, switch, or hub.
3.
Use the included power adapter and cord to plug the px2-300d into a surge-protected power
source.
6
Connecting the px2-300d Network Storage to Your Network
Hide quick links:
Advertisement
Table of Contents
