Before Applying Power; Safety Precautions - Kenwood HM-537MP Instruction Manual

Compact hi-fi component system
Table of Contents

Advertisement

Before applying power

Caution : Read this page carefully to ensure safe operation.
Units are designed for operation as follows.
Australia ....................................... AC 240 V only
Europe .......................................... AC 230 V only
Other countries ......... AC 110 - 120 / 220 - 240 V
The marking of products using lasers
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
The marking this product has been classified as Class 1. It
means that there is no danger of hazardous radiation out-
side the product.
Location: Bottom

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN-
TENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN
THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK
OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS
IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
2
EN
switchable*
CAUTION
DO NOT OPEN
Except for the Europe and Australia
* AC voltage selection
The AC voltage selector switches on the rear
panel are set to the voltage that prevails in the
area to which the unit is shipped.
connecting the power cord to your AC outlet,
make sure that the setting positions of these
switches match your line voltage. If not, they
must be set to your voltage in accordance with
the following direction.
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
Note:
Our warranty does not cover damage
caused by excessive line voltage due to im-
proper setting of the AC voltage selector switch.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
Before
AC voltage
selector
switches
VOLTAGE
SELECTOR
110-120V
VOLTAGE
SELECTOR
110-120V
220-240V
220-240V

Advertisement

Table of Contents
loading

Table of Contents