Miele KM 5801 Operating And Installation Instructions page 45

Problem
After the hob is
switched on "dE"
appears in the timer
display for a few
seconds.
The cooking zones do
not heat up.
The hob switches off
while it is use.
The heating element for
one of the cooking
zones switches on and
off.
Possible cause
The appliance is in
demonstration mode.
One of the cooking zones
has probably been on for
too long.
Power levels 1 to 8: This
is not a fault.
Power level 9:
This indicates a fault. The
overheating protection
mechanism has
triggered.
Problem solving guide
Remedy
Deactivate demonstration
mode (see
"Programming").
No remedy necessary.
You can use the cooking
zones again by switching
them back on (see
"Safety switch-off").
No remedy necessary.
This is quite normal, and
due to the electronic
regulation of the
temperature (see "How
the cooking zones work").
No remedy necessary.
The overheating
protection mechanism
switches the cooking
zone off automatically
before the ceramic
surface overheats. Once
the ceramic surface has
cooled down to a safe
level, the heating element
will automatically switch
back on again (see
"Overheating protection").
45