Miele KFN 37432 iD Operating And Installation Instructions page 27

The following information shows in the
display when the sensors are touched:
– Touching a sensor once: the last
temperature selected flashes.
– Each subsequent touch of the
sensor:
adjusts the temperature shown in
1 °C steps.
– Leaving a finger on the sensor:
changes the temperature
continuously.
Approx. 5 seconds after the last time a
sensor has been touched, the current
temperature inside the appliance is
automatically shown.
or
^ Touch the OK sensor to confirm your
selection.
The correct temperature
When you have adjusted the
temperature, wait for approx. 6 hours
if the appliance is not very full and
for approx. 24 hours if the appliance
is full before checking the temperature
display, as it will take this long for the
display to give an accurate reading.
If, after this time, the temperature is still
too high or too low, you will need to
adjust it again.
Temperature range
The temperature can be adjusted:
– In the refrigerator section from 1 °C
to 9 °C.
– In the freezer section from -15 °C to
-26 °C.
27