Carton Contents EasiCut 5500 blade cover instruction belt clip manual EasiCut 6000XT blade cover instruction manual belt clip IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna UK Ltd.
Page 3
General Power Tool Safety Warnings 4) Power tool use and care WARNING Read all safety warnings and all instruc- a) Do not force the power tool. Use the correct tions. Failure to follow the warnings and instructions power tool for your application. The correct may result in electric shock, fire and/or serious in- power tool will do the job better and safer at the...
Page 4
The wire which is coloured BLUE must be connected 2. Flymo Extension Cables are available from your local to the Terminal which is marked with the letter 'N' or Husqvarna UK Ltd. Approved Service Centre.
To start your Hedgetrimmer To start, push forward the lock-off button (F1), squeeze the main switch lever (F2), release lock-off EasiCut 5500 button. 1. There are four switch levers fitted to your Hedgetrimmer. 3. Main switch lever (F2) and one other need to be held 2.
How to Use How to Use your Hedgetrimmer 1. Inspect area to be cut before each use - remove objects which can be thrown or become entan- gled in the cutting blades. 2. Always keep the Hedgetrimmer in front of your body.
Fault Finding Hints Fails to Operate Fails to stop when one switch lever is released. 1. Is the Power Turned On? Immediately disconnect from the mains elec- 2. Check the fuse in the plug, if blown replace. tricity supply and consult your local approved 3.