EN GLI SH 1/2" (13 mm) CORDLESS DRILL/DRIVER DCD920, DCD930, DCD940 1/2" (13 mm) CORDLESS HAMMERDRILL/DRIVER DCD925, DCD935, DCD945 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or DCD925, DCD920, DCD935, DCD930, DCD945, DCD940 serious injury. WALT declares that these products described CAUTION: Indicates a potentially...
EN GLI SH These products also comply with Directive Avoid body contact with earthed or 2004/108/EC. For more information, please contact grounded surfaces such as pipes, WALT at the following address or refer to the radiators, ranges and refrigerators. There back of the manual.
Page 9
EN GL IS H parts. Loose clothes, jewellery or long hair other battery packs may create a risk of can be caught in moving parts. injury and fire. If devices are provided for the connection When battery pack is not in use, keep it of dust extraction and collection facilities, away from other metal objects like paper ensure these are connected and properly...
EN GLI SH Residual Risks batteries may burst causing personal injury and damage. The following risks are inherent to the use of CAUTION: Under certain conditions, percussion drills: with the charger plugged in to the – Injuries caused by touching the rotating parts or power supply, the exposed charging hot parts of the tool.
EN GL IS H • Disconnect the charger from the outlet Automatic Refresh before attempting any cleaning. This will The automatic refresh mode will equalise or balance reduce the risk of electric shock. Removing the individual cells in the battery pack at its peak the battery pack will not reduce this risk.
• A small leakage of liquid from the battery pack cells may occur under extreme usage BATTERY TYPE or temperature conditions. This does not The DCD925 and DCD920 operate on 18 volt indicate a failure. battery packs. However, if the outer seal is broken: The DCD935 and DCD930 operate on 14.4 volt...
(DCD945, DCD935, DCD925 models) inexperienced operators use this tool. 1 cordless midhandle drill driver Electrical Safety (DCD940, DCD930, DCD920 models) The electric motor has been designed for one 1 Li-Ion battery pack (L1 models) voltage only. Always check that the battery pack...
EN GLI SH 2. Slide the battery pack firmly into the handle until Your D WALT charger is double insulated you hear the lock snap into place. in accordance with EN 60335; therefore no earth wire is required. TO REMOVE THE BATTERY PACK FROM THE TOOL If the supply cord is damaged, it must be replaced 1.
Page 15
EN GL IS H NOTE: The first time the tool is run after changing driven. To select any of the numbers, rotate until the the direction of rotation, you may hear a click on desired number aligns with the arrow. start up.
EN GLI SH OPERATION Screwdriver Operation (fi g. 4–6) 1. Select the desired speed/torque range using the Instructions for Use three-speed gear shifter (g) on the top of tool to match the speed and torque to the planned WARNING: Always observe the safety application.
EN GL IS H Consult your dealer for further information on the WARNING: To reduce the risk of appropriate accessories. serious personal injury, turn tool off and disconnect battery pack Protecting the Environment before making any adjustments or removing/installing attachments or Separate collection.
Page 18
EN GLI SH GUARANTEE WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user.
Page 20
06126-21-1 Richard Klinger Str. 11 Fax: 06126-21-2770 65510 Idstein www.dewalt.de Ελλάς Black & Decker (Ελλάς) Α.Ε. Τηλ: 30 210 8981-616 www.dewalt.gr Στράβωνος 7 & Βουλιαγμένης 159 Service: 30 210 8981-616 Γλυφάδα 16674, Αθήνα Φαξ: 30 210 8983-570 España WALT Tel: 934 797 400 Parque de Negocios “Mas Blau”...