Kenwood Sovereign MX-5000 User Manual

Kenwood power amplifier user's guide mx-5000
Hide thumbs Also See for Sovereign MX-5000:

Advertisement

User's Guide
MX-5000
B60-5163-08 01 KO (K) CR 0103

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood Sovereign MX-5000

  • Page 1 User’s Guide MX-5000 B60-5163-08 01 KO (K) CR 0103...
  • Page 2: Table Of Contents

    12 V Relay Power Control The MX-5000 can be powered on and off by an external 12 volt trigger signal, so it can be installed in a remote location. Lucasfilm and THX are registered trademarks of Lucasfilm Ltd.
  • Page 3: Installation

    Installation Notes on heat generation • This unit incorporates a ventilation fan to process heat generated during operation. As the fan starts to rotate automatically when the internal temperature of this unit rises, avoid installing or setting which may prevent ventilation of the unit. * Leave clearance of more than 10 cm (4 in.) to the left and right, more than 50 cm (20 in.) above and more than 10 cm (4 in.) in front and rear of the unit.
  • Page 4: 2-Channel Stereo Configuration

    In the case of 2 Ω In the case of 6 Ω * If you connect more than one pair of speakers to the MX-5000, move the 2Ω (STEREO)/6Ω OVER (THX) switch to the 2Ω (STEREO) position. The amplifier’s performance is not THX...
  • Page 5: Mono (Bridged, Or Btl) Configuration

    Mono (bridged, or BTL) configuration In this configuration, the MX-5000’s two individual channels op- erate together to drive a single speaker (such as a subwoofer) in mono. This allows the amplifier to deliver more than double the power of one of its channels to the speaker.
  • Page 6: 2-Channel Mono Configuration

    In the case of 2 Ω In the case of 6 Ω * If you connect more than one pair of speakers to the MX-5000, move the 2Ω (STEREO)/6Ω OVER (THX) switch to the 2Ω (STEREO) position. The amplifier’s performance is not THX Stereo mini-plug cord (supplied) For 12 V RELAY CONTROL, see page 7.
  • Page 7: Controls And Indicators

    When the supplied mini-plug cord is not used, the STANDBY indicator does not work. 12 V Relay power control The MX-5000 can be powered on and off by a 12 volt trigger signal from a compatible component (such as the Kenwood Sovereign VR-5900 receiver).
  • Page 8: Specifications

    ... 385 mm (15-5/32") Weight (net ) ... 12.3 kg (27.2 lb) • KENWOOD follows a policy of continuous advancements in development. For this reason specifi- cations may be changed without notice. • Manufactured under license from Lucasfilm Ltd. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd.

Table of Contents