Sceptre E248 User Manual page 14

HEADPHONE – This connection is for headphones to be attached to
7.
the TV. This connection works with both 2 ring and 3 ring connector
headphone.
USB – USB connects to USB flash drives for playing music and
8.
picture. The USB port is also used for updating the TV's firmware.
HDMI1-2 – HDMI connects to devices that use HDMI cable, such as
9.
Blu-ray or HD DVD player, or HD cable / satellite set-top box. This
connection port receives pure digital audio and high definition signal
through one single cable. This port also can accept a HDCP video
device for video. HDMI 2 also doubles as the MHL connection for
cell phones. MHL is a protocol where the TV will display what your
cell phone displays. If your cell phone supports MHL you can
purchase a MHL cable from any electronic store and connect it to
HDMI 2 and also your cell phone. Make sure the TV's source is
changed to HDMI 2 and turn on your cell phone. You should see an
image of your cell phone screen. HDMI 2 also supports ROKU™
streaming stick. Plug the ROKU stick to HDMI 2, and switch your
source to HDMI2. Afterwards use the purple colored buttons to
access ROKU functions.
Please Note:
•
This TV features a power saving function which will turn off the
TV automatically after 10 minutes of idling on a connection with
no signal. This feature is present on all connection.
•
This TV does NOT support QAM under TV tuner.
- 14 -
www.SCEPTRE.com
SCEPTRE E248 HDTV User Manual