Table of Contents
Advertisement
SC733 Chassis Manual
Drive Carrier
The drives are mounted in drive trays to simplify their installation and removal from
the chassis. These trays also help promote proper airflow for the drive bays.
Warning: Except for short periods of time (swapping hard drives), do not operate
the server with the chassis drive bays empty.
Figure 4-6: Removing Dummy Drive from the Drive Carrier
Installing the Hard Drive into the SC733T and SC733TQ Hard Drive Carriers
1. Remove the two screws securing the dummy drive to the drive carrier and
remove the dummy drive. Place the hard drive carrier on a flat surface such
as a desk, table or work bench.
Figure 4-5: Chassis Drive Carrier
1
4-6
Dummy Drive
1
Advertisement
Table of Contents
