JVC EXAD KD-SHX851 Service Manual page 19

QQ
3.2.9 Removing the CD pickup 3 7 63 1515 0
(See Figs.17 to 19)
• Remove the mechanism control board.
(1) From the bottom side of the CD mechanism assembly, turn
the feed gear in the direction of the arrow to move the CD
pickup assembly outwards. (See Fig.17.)
(2) Remove the screw F and remove the thrust spring. (See
Fig.17.)
(3) Remove the CD pickup assembly in an upward direction
from the side of L.S. gear and release the CD pickup as-
sembly from joint s of the sub guide. (See Fig.18.)
(4) Move the lead screw of the CD pickup assembly in the di-
rection of the arrow to release at joint t. (See Fig.18.)
(5) Remove the screw G attaching the CD rack spring and CD
rack plate on the CD pickup assembly. (See Fig.19.)
(6) Pull out the lead screw. (See Fig.19.)
Caution:
• When attaching the CD pickup assembly, attach the CD
pickup assembly at joint s of sub guide first, and attach the
lead screw to the joint t on the L.S.holder 2. (See Fig.18.)
• Perform electric adjustment after replacing the pickup.
TE
L 13942296513
www
.
http://www.xiaoyu163.com
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
CD pickup assembly
L.S.holder 2
Q Q
3 6 7 1 3 1 5
Sub guide
s
CD rack spring
CD rack plate
co
CD Pickup
.
9 4 2 8
CD mechanism assembly
Feed gear
Thrust spring
Fig.17
CD Pickup assembly
t
Lead screw
0 5 8 2 9 9 4 2 8
L.S. Gear
Fig.18
G
Lead screw
m
Fig.19
(No.MA192)1-19
9 9
F
9 9