Omron HV-F128 Instruction Manual page 9

Special Mode
You can use this mode when you want to adjust the stimulation to your favourite
programme. This mode can be used in combination with any Automatic Courses.
Hyper Mode
The unit provides gradual increase of intensity during treatment.
HYPER
❇ When you keep on pressing the Hyper Button for several seconds, the unit will start operation in Hyper
Mode.
❇ Since intensive stimulation is applied in this Mode, please be careful not to switch to this Mode
suddenly.
❇ In this Mode, the batteries will wear out faster than in other Modes.
Soft Mode
SOFT
The unit provides soft stimulation without giving the feel of irritation.
Repeat Mode
REPEAT
The unit repeats your favourite stimulation.
Point & Wide Mode
POINT
The unit treats the red and the white sides alternately.
WIDE
The unit treats both the red and white sides simultaneously.
❇ Select either the Wide or the Point Button.
Balance Adjustment (Switching between red and white buttons)
The unit emphasize therapy on the red side.
R
The unit emphasize therapy on the white side.
W
Selecting
Emphasis on intensity is
placed upon the red side
POINT
When is
while treating both sides
selected
alternately.
Emphasis on intensity is
placed upon the red side
When WIDE is
while treating both sides
selected
simultaneously.
Selecting
R
Emphasis on intensity is
placed upon the white side
while treating both sides
alternately.
Emphasis on intensity is
placed upon the white side
while treating both sides
simultaneously.
Selecting None of Them
W
Treats both red and white
sides with the same
intensity alternately.
Treats both red and white
sides with the same
intensity simultaneously.
8