Table of Contents
Advertisement
Write-to-Read Delay (Twtr)
1 bus clock
2 bus clock
Refresh Rate (Tref)
Set the Refresh Rate.
Read Preamble value
2~9.5ns
Async Latency value
2~11ns
CPU Spread Spectrum
Disabled
Center Spread
PCIE Clock
100Mhz ~ 150Mhz
Hammer Vid Control
Supports adjustable Hammer Vide from 0.825V to 1.550V. (Default value: StartUp)
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto
Fast
Turbo
DDR voltage control
Normal
+0.1V
+0.2V
Set Write-to-Read Delay to 1 bus clock.
Set Write-to-Read Delay to 2 bus clock. (Default value)
Set the Read Preamble value. (Default value: 5.5ns)
Set the Async Latency value (Default value: 7ns)
Disable CPU Spread Spectrum.
Set CPU Spread Spectrum to Center Spread. (Default value)
Set PCI-E clock from 100Mhz to 150Mhz.
Set Robust Graphics Booster to Auto. (Default value)
Set Robust Graphics Booster to Fast.
Set Robust Graphics Booster to Turbo.
Supply DDR voltage as DDR required. (Default value)
Increase DDR voltage +0.1V.
Increase DDR voltage +0.2V.
- 45 -
BIOS Setup
Advertisement
Table of Contents
