Download the driver program. The driver software can be downloaded from the Pioneer website. • When downloading the driver program, designate the folder where you wish the program to be saved.
Page 3
Use a proper USB cable to connect a computer to a device equipped with Click on [Next]. USB connector, then turn on the power. For more information regarding connections, check the Operating Instructions for this device. A–type B–type Click on [Install]. * The illustration may appear differently, depending on the model used.
Page 4
In the case of Windows 8 or Windows 8.1, simultaneously press the [Windows] key and [X] key, then select “Programs and functions”, and proceed to step 3. From the Control Panel menu, click on [Add or Remove Programs]. Select [Pioneer USB D/A Converter], then click on either [Remove] or [Uninstall]. The uninstaller dialog will appear.
Page 5
Click on [Universal Serial Bus controllers] and confirm that [USB Composite Device] is listed. If the [Pioneer USB D/A Converter] does not appear, confirm that the USB port has been selected as input source. Then try reconnecting the cable or turning the power off and then on again;...
Page 6
To enable the new setting, reboot your computer. Confirm that your media player’s sound volume is set to Maximum. In the event your media player requires an output plugin setting, confirm that [Pioneer USB D/A Converter] is selected. Procedure finished.
Page 7
From the [Tasks] list, click on [Device Manager]. If the [Pioneer USB D/A Converter] does not appear, confirm that the USB port has been selected as input source. Then try reconnecting the cable or turning the power off and then on again;...
Page 8
Under the [Playback] tab, confirm that for [Speakers], [Pioneer USB D/A it off. Converter] is checked as the default device. If another device has been selected, select [Pioneer USB D/A Converter], and click to [Set Default]. Speakers Confirm that your media player’s sound volume is set to Maximum.
Page 9
Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds], Click on [Start] [Control Panel] [Hardware and Sound] [Sound]. then click on [Apply]. Under the [Playback] tab, for [Speakers], double click on [Pioneer USB D/A Converter] to display the Properties. Procedure finished.
Page 10
Under the [Advanced] tab, select for [Default Format] the desired output sampling rate, then click on [Apply]. Procedure finished.
Page 11
Click on [Start] [Control Panel] [Hardware and Sound] [Sound]. Procedure continues. If the [Pioneer USB D/A Converter] does not appear, confirm that the USB port has been selected as input source. Then try reconnecting the cable or turning the power off and then on again;...
Page 12
If the Speaker Mute indicator (at the left side of the Balance button) is lighted, click it to turn it off. If another device has been selected, select [Pioneer USB D/A Converter], and click on [Set Default]. Confirm that your media player’s sound volume is set to Maximum.
Page 13
Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds], Click on [Start] [Control Panel] [Hardware and Sound] [Sound]. then click on [Apply]. Under the [Playback] tab, for [Speakers], double click on [Pioneer USB D/A Converter] to display the Properties. Procedure finished.
Page 14
Under the [Advanced] tab, select for [Default Format] the desired output sampling rate, then click on [Apply]. Procedure finished.
Page 15
“Category”. Procedure continues. If the [Pioneer USB D/A Converter] does not appear, confirm that the USB port has been selected as input source. Then try reconnecting the cable or turning the power off and then on again; when this is done, the [Pioneer USB D/A Converter] should be recognized.
Page 16
If the Speaker Mute indicator (at the left side of the Balance button) is lighted, click it to turn it off. If another device has been selected, select [Pioneer USB D/A Converter], and click on [Set Default]. Confirm that your media player’s sound volume is set to Maximum.
Page 17
Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds], is set to “Category”. then click on [Apply]. Under the [Playback] tab, for [Speakers], double click on [Pioneer USB D/A Converter] to display the Properties. Procedure finished.
Page 18
Under the [Advanced] tab, select for [Default Format] the desired output sampling rate, then click on [Apply]. Procedure finished.
Page 19
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 http://www.pioneer.com.au PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, México, D.F. 11000 TEL: 55-9178-4270 http://pioneer-mexico.com Pioneer China Holding Co., Ltd.