Agitator Speed Selector; Brush Indicator; Cleaning Indicator Screen - Hoover Vacuum Cleaner Owner's Manual

Automatic Shut-Off
2.4
C
When the recovery tank (lower tank) is full, the
automatic "shut-off" mechanism will shut off
the cleaner suction.
When this happens, the red float disk (C) will rise
to the top of the recovery tank lid (see
illustration). The cleaner will no longer pick up
dirty solution and the motor sound will become
noticeably higher in pitch.
When this happens, turn cleaner off and empty
recovery tank before continuing use.
Check clean solution tank also; it may need to be
refilled.

Agitator Speed Selector

The 'SteamVac' cleaner
2.7
has three agitator
brush settings:
Power Scrub - for
normal cleaning of
carpet.
Gentle Scrub - for
gentle cleaning of
carpet
D
Spill Pick Up - when
brushing is not desired
(such as when picking up liquid
spills).
Slide selector button (D) to the desired setting
before cleaning.

Cleaning Indicator Screen

WARNING
- To reduce the risk of electric
shock - Unplug before cleaning or servicing.
Remove clear cover
2.9
and wipe off screen
(G) with a damp cloth.
Snap cover back into
position.
G
Transport
2.5 2.6
Turn cleaner off The cleaner may
before transporting. also be lifted by
placing a hand
To move the cleaner
under the upper
from room to room,
clean solution tank
put handle in
handle as shown.
upright and locked
position, tilt cleaner
back on wheels, and
push forward.

Brush Indicator

2.8
E
F
The brush indicator will spin (E) when the cleaner
is turned on and the brushes are rotating.
If the indicator does not spin (F) and the pattern is
visible when the cleaner is turned on, the brushes
are not rotating.
There are two reasons why the brushes may not
be rotating:
1. Brush speed selector is turned to Spill Pick Up
(see previous section)
2. Brush indicator screen is dirty
7