Adjusting the Projected Image
Adjusting the Height of the Projected Image
The projector is equipped with two elevator feet for adjusting the image
height.
To raise the image:
1
Press the elevator button.
2
Raise the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use the rear Tilt adjusting wheel to fine-tune the display angle.
To lower the image:
1
Press the elevator button.
2
Lower the image to the desired height angle, then release the button
to lock the elevator foot into position.
3
Use the rear Tilt adjusting wheel to fine-tune the display angle.
2
Elevator foot
Elevator button
1
3
Tilt adjusting wheel
11