Pioneer X-SMC00 Operating Instructions Manual page 2

Slim micro system
Hide thumbs Also See for X-SMC00:
Table of Contents

Advertisement

CAUTION
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product,
and to protect it from overheating. To prevent fire
hazard, the openings should never be blocked or
covered with items (such as newspapers, table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed.
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight
(or strong artificial light)
When using this product, confirm the safety
information shown on the bottom of the unit and the
AC adapter label.
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
D3-4-2-1-1_B1_En
period.
CAUTION
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
D3-4-2-1-3_A1_En
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
D3-4-2-1-7a_A1_En
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, IEC 60825-1:2007.
D3-4-2-1-7b*_A1_En
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
D3-4-2-1-7c*_A1_En
D3-4-2-2-4_B1_En
CLASS 1 LASER PRODUCT
K041_A1_En
D3-4-2-2-2a*_A1_En
D58-5-2-2a_A1_En
D41-6-4_A1_En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-smc00dab-wX-smc00dab

Table of Contents