General Setup - Draytek Vigor 2925 Series User Manual

4 . 2 . 2 G e n e r a l S e t u p
4 . 2 . 2 G e n e r a l S e t u p
This page provides you the general settings for LAN. Click LAN to open the LAN settings
page and choose General Setup.
There are four subnets provided by the router which allow users to divide groups into different
subnets (LAN1 – LAN5). In addition, different subnets can link for each other by configuring
Inter-LAN Routing. At present, LAN1 setting is fixed with NAT mode only. LAN2 – LAN5
can be operated under NAT or Route mode. IP Routed Subnet can be operated under Route
mode.
Note: LAN5 is not supported by Vigor2925F/Vigor2925Fn.
Available settings are explained as follows:
Item Description
Vigor2925 Series User's Guide
192