Draytek Vigor 2925 Series User Manual page 447

IP Address
Port
Idle Timeout
Scaling
Screen Size
Samba Path
3. Enter the required information.
4. After finished the above settings, click OK to save the configuration.
Samba Application – It allows you to access and control a
remote PC through Samba service.
If you choose VNC or RDP, you have to type the IP address
for this protocol.
If you choose VNC or RDP, you have to specify the port
used for this protocol. The default setting is 5900.
If you choose VNC, you have to specify the time for
disconnecting the SSL VPN tunnel.
If you choose VNC, you have to choose the percentage
(100%, 80%, 60%) for such application.
If you choose RDP, you have to choose the screen size for
such application.
If you choose Samba, you have to specify the path of the
Samba service.
435
Vigor2925 Series User's Guide