Protection Foil For Connector - Sony Ericsson W395 Working Instruction, Mechanical

ReplacementReplacement

4.17 Protection Foil for Connector

Follow the 3.1 – 3.5 Disassembly instructions!
Carry out the replacement as described below.
Follow the 5.3 – 5.7 Reassembly instructions!
REMOVAL
Loosen the Protection Foil using the Flex Film Assembly
Tool.
Be careful not to damage the H-H FPC during the
operation.
Carefully peel off the Protection Foil in the direction of the
arrow using the Flex Film Assembly Tool.
INSTALLATION
Place a new Protection Foil in position, taking the blue line
as the guiding line.
1223-6753 Rev 1
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
31(59)