Using The Shooting Functions; Using The Flash - Sony CS-301 Instruction Manual

Using the flash

In a dark location, using the flash allows you to shoot the subject brightly,
and it also helps to prevent camera shake. When shooting into the sun, you
can use the flash to shoot a bright image of the backlit subject.
1
Fn button t
• For further information on the flash modes available for each shooting
mode, see page 78.
2
Press the
The flash pops up.
• In Intelligent Auto, Superior Auto or
Scene Selection mode, the flash
automatically pops up if the amount of
light is insufficient or the subject is
backlit. The built-in flash does not pop
up even if you press the
3
After the flash has finished
charging, shoot the subject.
Flashing: The flash is being charged.
When the indicator flashes, you cannot
release the shutter.
Lit: The flash has been charged and
is ready to fire.
• When you press the shutter button
halfway down under dark lighting in
autofocus mode, the flash may be fired
to help focus on a subject (AF
Illuminator).
42
(Flash Mode) t Select the desired setting
button.
button.
(Flash charging) indicator
button