JVC LT-37R70BU Service Manual page 12

3.1.8 REMOVING THE SW PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [A].
(2) Remove the CONTROL ASS'Y with SW PWB.
(3) Remove the 2 screws [B].
(4) Remove the SW PWB from the CONTROL ASS'Y.
3.1.9 REMOVING THE LED PWB (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 2 screws [C].
(2) Remove the LED PWB.
3.1.10 REMOVING THE SPEAKER (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 4 screws [D].
(2) Remove the SPEAKER (L /R).
SUPPORT
BRACKET
D
SPEAKER
LCD PANEL UNIT
SW PWB
B
A
A
CONTROL
ASS'Y
1-12 (No.YA406)
G
MAIN BASE
G
G
J
H
TOP FRAME
L
C
LED PWB
3.1.11 REMOVING THE LCD PANEL UNIT (Fig.2)
• Remove the STAND.
• Remove the REAR COVER.
• Remove the BACK BRACKET.
• Remove the POWER CORD HOLDER.
(1) Remove the 2 screws [E] and 2 screws [F].
(2) Remove the STAND BRACKET.
(3) Remove the 3 screws [G].
(4) Remove the MAIN BASE.
(5) Remove the 4 screws [H].
(6) Remove the SUPPORT BRACKET.
(7) Remove the 3 screws [J] and 2 screw [K].
(8) Remove the LCD PANEL UNIT with TOP/BOTTOM
FRAME.
(9) Remove the 2 screws [L].
(10) Remove the TOP FARAME from the LCD PANEL UNIT.
(11) Remove the 2 screws [M].
(12) Remove the BOTTOM FARAME from the LCD PANEL UNIT.
STAND
F
BRACKET
D
L
SPEAKER
SUPPORT
BRACKET
FRONT
FRONT PANEL
Fig.2
E
The terminal of a connector is turned up and connects.
Surely insert and lock.
terminal side
H
Check that connector is inserted completly.
(Don't insert aslant)
"LVDS CABLE"
white Black
white Black
LCD PANEL SIDE
DIGITAL PWB SIDE
M
J
BOTTOM FRAME