Nokia N70 User Manual page 29

Outgoing
Missed communication events
To monitor all voice and video
calls, text messages, or data
connections registered by the
device, press , select
own > Log, and press the
scroll key to the right to open
the general log. For each
communication event, you
can see the sender or recipient
name, phone number, name of
the service provider, or access
point. You can filter the general log to view just one type
of event and create new contact cards based on the log
information.
Tip! If you want to see the duration of a voice call
on the main display during an active call, select
Options >
Tip! To view a list of sent messages, press
select Messaging
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging center, or Web pages are shown as
packet data connections.
28 Copyright © 2006 Nokia. All rights reserved.
My
Settings > Show call duration
> Sent.
To filter the log, select
To erase the contents of the log, recent calls register, and
messaging delivery reports permanently, select
Clear log. Select
To set the Log duration, select
duration. The log events remain in the device memory for
a set number of days after which they are automatically
erased to free memory. If you select
contents, recent calls register, and messaging delivery
reports are permanently deleted.
To view the details of a communication event, in the
general log view scroll to an event, and press the scroll key.
Tip! In the details view you can copy a phone
number to the clipboard, and paste it to a text
message, for example. Select
Number.
Packet data counter and connection timer: To view how
> Yes.
much data, measured in kilobytes, is transferred and how
long a certain packet data connection lasts, scroll to an
, and
incoming or outgoing event indicated by Pack., and select
Options > View
Options > Filter and a filter.
Yes to confirm.
Options > Settings
No log, all the log
Options
details.
Options >
> Log
> Copy