Toshiba e-studio200l Service Manual page 623

(4) Turn ON the power while [4] button and [9] button are pressed simultaneously.
The screen for selecting the items to be updated is displayed after 3 minutes. "*" is displayed
next to the items to be updated. (All items other than "0. OS Update" are selected in the default
settings.)
Note: Note:
The display of items on this screen varies depending on the types of data written on the USB
storage device. Each item is displayed only when each data file is written on the USB storage
device in the following conditions.
Item
0. OS Update
1. HDD Update
2. UI Data Update
3. System Firmware Update
4. NIC Firmware Update
5. Scanner Firmware Update
6. Machine Firmware Update
If the USB storage device is not recognized properly, the following message is displayed. In this
case, turn OFF the power of the equipment and connect the device properly. Then repeat the
procedure from (4).
June 2004 © TOSHIBA TEC
Fig.6-72
Condition
ROM.bin is written.
All master data files (1, 2, 3 ... n) are written.
ROM.bin is written.
sysfirm.bin and ROM.bin are written.
ROM.bin is written.
ROM.bin is written.
ROM.bin is written.
Fig.6-73
e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
6 - 69
6