IMPORTANT
This document is intended for use by authorized Nokia
service centers only. Please use the document together
with other documents such as the Service Manual and
Service Bulletins.
Version information
While every effort has been made to ensure that the document is
accurate, some errors may exist. Please always check for the latest
published version for this document.
If you find any errors in the document please send email to:
service.manuals@nokia.com
Version history
1.0
First approved version
This material,including documentation and any related computer programs
is protected by copyright, controlled by Nokia. All rights are reserved. Copy-
ing, including reproducing, modifying, storing, adapting or translating any or
all of this material requires the prior written consent of Nokia. This material
also contains company confidential information, which may not be disclosed
to others without the prior written consent of Nokia.
Confidential Copyright © 2010 Nokia Only for training and service purposes
Page 1 (11) | Front Page | 2710 Navigation Edition RM-586 | Board: 3bx_40b | v1.0 | 19.03.2010
Service Schematics
NOKIA
2710
Navigation Edition
RM-586
Measurements
All measurements were made using the following equipment:
Nokia repair SW
: Phoenix 2009.20.011.39237
Oscilloscope
:
PicoScope 3206
Spectrum Analyzer
: Advantest R3162
Multimeter
: Fluke 175
The measurement points in the schematics are linked to the oscillo-
grams on the signal overview page. The links cycle between the
measurement point in the schematics, the oscillogram and the
measurement point in the component finder.
Table of Contents
Front page
Academy
1
2
3
4
5
6
7
8
9
10
11