Language; Video-1 Setting/Video-3 Setting; Ai Volume - JVC LT-Z37DX5 Service Manual

SET UP menu

LANGUAGE

The LANGUAGE setting which was
performed in the "Initial settings (Setup
tour)" (page 7) can be changed.
1 Choose LANGUAGE, then press
the a or 3 button
A sub-menu of the LANGUAGE function
appears.
LANGUAGE
D1002-EN
2 Press the 6 buttons to choose a
language. Then press the a
button
VIDEO-1 SETTING/VIDEO-3
SETTING
Set the VIDEO-1 SETTING or VIDEO-3
SETTING correctly according to the video
signal input from the external device
connected to the VIDEO-1 or VIDEO-3
terminal. If this setting is incorrect, images
will not be displayed.
VIDEO:
If a normal video signal (composite video
signal) is input.
COMPONENT:
If a Component video signal (Y, Cb/Pb, Cr/
Pr signals) is input.
• For detailed connecting methods, see
"Additional preparation" on page 46. This
Television is compatible with the 1080i
(1125i), 576p (625p) or 480p (525p)
video signal only when the component
video signal is input.
• When the input signal is 1080i (1125i),
576p (625p) or 480p (525p), each signal
type is displayed at the upper right side on
the TV screen by setting the input to
VIDEO-1 or VIDEO-3.
38

AI VOLUME

You can prevent the sudden increase or
decrease of sound that occurs when changing
the channel to another channel.
ON:
This function is turned on.
OFF:
This function is turned off.
• The AI VOLUME function may not
operate as expected if the sound input
level from a broadcast station is extremely
low.
• This function does not work in the
VIDEO mode.