Completing Your Installation - Hunter Type 3 Owners And Installation Manual

9-1. Partially install two 8-32 screws into the light kit mounting plate.
9-2. Thread the plug connector from the fan through the light kit.
9-3. Align the keyholes in the light kit with the two partially installed
screws and turn the light kit clockwise until the screws are in the
narrow ends of the keyholes.
9-4. Install the remaining 8-32 screw to secure the light kit to the
mounting plate. Securely tighten all three screws.
9-5. Connect the upper plug connector from the fan to the lower plug
connector in the light kit.
9-6. Attach the LED assembly to the light kit by installing two light
assembly screws through the slots, not the screw holes.
9-7. Place the glass globe into the globe trim ring. Align the three holes
in the trim ring with the three holes in the light kit. Install and
securely tighten all three globe assembly screws.
Step 9-7
Trim
Ring
Glass
Globe
9 • Completing Your Installation
Globe
Assembly
15
42200-01 • 04/12/11 • Hunter Fan Company
Screw
Attachment
Screw
Step 9-1
Step 9-4
Light
Assembly
Screw
Step 9-6