Making A Call Using Call Records; Calling By Voice Recognition (Ddx814/ Ddx8034Bt) - Kenwood DDX8034BT Instruction Manual

Hands Free Unit Control

Making a Call Using Call Records

Calls by selecting a phone number from the
outgoing, incoming, or missed calls list.
1 Display the Hands-Free Control screen
See <Making a call> (page 52).
2 Display the Outgoing Calls, Incoming Calls,
or Missed Calls screen
3 Select from calls list
Example : Outgoing Calls screen
Calls the selected phone number.
4 Make a call
⁄
• The Outgoing Calls list screen, Incoming Calls list,
or Missed Calls list screen shows the list of the calls
originated from or received at this unit. They are not the
ones stored in the cell-phone memory.
Calling by Voice Recognition
(DDX814/ DDX8034BT)
Calls by recognizing the registered voice.
⁄
• In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 56). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 57).
54 DNX9140/DDX814/DDX8034BT
1 Display the Hands-Free Control screen
See <Making a call> (page 52).
2 Display the Voice Recognition screen
3 Say the name registered in the Phonebook
When a beep is heard, say the name within 2
seconds.
When a beep is heard, say the category within
2 seconds.
If there are more than one phone numbers
registered under the same name, go to step 4.
4 Select a Phone number category
Selects the Phone number category.
5 Make a call
⁄
• A message is displayed if the voice is not recognized.
Read the message for the further operation.