Monitor Control Function; Power Off; Switching The Monitor's Picture; Volume - Kenwood LZ-760R Instruction Manual

Monitor Control Function

V.SEL
SCRN
PWR MODE

Power Off

Press the [PWR] button for at least 1 second.
Power On
Press the [PWR] button.

Switching the Monitor's Picture

Press the [V.SEL] button.
Each time the button is pressed the monitor's
picture switches as follows:
During the KTC-V500N, KTC-V500P or KTC-
V500E is not connected:
Display Picture
"Video 1" Video 1 (AV-IN1 setting during
"Video 1")
"Video 2"/ Video 2 (AV-IN2 setting during
"R-Cam" "Video 2" or "R-Cam")
"NAV" Navigation (NAV setting during
"RGB" or "AV-IN1")
During the KTC-V500N, KTC-V500P or KTC-
V500E is connected:
Display Picture
"Video 1" Video 1 (AV-IN1 setting during
"Video 1")
"Video 2"/ Video 2 (AV-IN2 setting during
"R-Cam" "Video 2" or "R-Cam")
Channel Television
"NAV" Navigation (NAV setting during
"RGB" or "AV-IN1")
• For "AV-IN" and "NAV" setting, refer to <System Setup
☛
Screen-1> ( Page 9).
You cannot view television and video pictures whilst the
vehicle is moving. To enjoy television and video pictures,
find a safe place to park and engage the parking brake.
4
|
English

Volume

Increasing Volume:
Press the [5] button.
Decreasing Volume:
Press the [∞] button.

Switching the TV/Video Screen Mode

Press the [MODE] button.
Each time the button is pressed the screen mode
switches as follows:
Display
"Full"
"Just"
"Zoom"
"Normal"
• You cannot operate when the navigation picture is
yyy
displayed.
• Normal
yyy
yyy
• Just
yyy
Setting
Full screen mode
Just screen mode
Zoom screen mode
Normal screen mode
yyy
• Full
yyy
• Zoom