Tyre Messages; Transmission Messages - Cadillac 2015 ATS Owner's Manual

start, turn the steering wheel the
other way, and try starting the
vehicle again.

Tyre Messages

SERVICE TIRE MONITOR
SYSTEM
This message displays if there is a
problem with the Tyre Pressure
Monitor System (TPMS). See Tyre
Pressure Monitor Operation on
page 10-40.
TIRE LEARNING ACTIVE
This message displays when the
system is learning new tyres. See
Tyre Pressure Monitor Operation on
page 10-40.
TIRE LOW ADD AIR TO TIRE
This message displays when the
pressure in one or more of the tyres
is low.
This message also displays LEFT
FRONT, RIGHT FRONT, LEFT
REAR, or RIGHT REAR to indicate
the location of the low tyre.
The low tyre pressure warning light
will also come on. See Tyre
Pressure Light on page 5-22.
If a tyre pressure message appears
on the DIC, stop as soon as you
can. Inflate the tyres by adding air
until the tyre pressure is equal to the
values shown on the Tyre and
Loading Information label. See
Tyres on page 10-34, Vehicle Load
Limits on page 9-10, and Tyre
Pressure on page 10-37.
You can receive more than one tire
pressure message at a time. The
DIC also shows the tire pressure
values. See Driver Information
Centre (DIC) on page 5-25.

Transmission Messages

SERVICE TRANSMISSION
This message displays if there is a
problem with the transmission. See
your dealer.
Instruments and Controls
SHIFT DENIED
This message displays when using
the Driver Shift Control (DSC) and
attempting to shift to a gear not
appropriate for the vehicle speed
and engine revolutions per minute
(rpm). See Manual Mode on
page 9-23.
SHIFT TO PARK
This message displays when the
transmission needs to be shifted to
P (Park). This may appear when
turning the ignition off if the vehicle
is not in P (Park).
TRANSMISSION HOT
ENGINE
This message displays and a chime
sounds if the transmission fluid in
the vehicle gets hot. Driving with the
transmission fluid temperature high
can cause damage to the vehicle.
Stop the vehicle and let it idle to
allow the transmission to cool. This
message clears when the fluid
temperature reaches a safe level.
5-41
IDLE