4.4 System
This menu consists of 2 sub-menus : Product Info and
Reset.
●
Place the cursor on this sub menu and press OK key.
4.4.1 Product Info
If you have to contact your service provider or a service
center they might ask for information available from this
menu.
Place the cursor on this sub menu and press the OK key.
●
If new software is available "SW Update" buttons will be
activated so you can update the receiver. There are two
types of updates. In the Manual mode, you can select
the Frequency, Modulation, Symbol Rate and PID value
using ¦/, /or numeric keys. If you don't know
those informations, press the Auto mode.
N N o o t t e e
: If the receiver is updated via "SW Update", the
version number may be changed.
4.4.2 Reset
This is to restore the factory set values in case the user
has encountered some problems after changing any new
values of channel data and others, which may be in error.
Select Reset menu in System menu and press OK key.
If you want to continue, select "YES" in the warning
window. The receiver will be reset to settings
automatically. Please note that the Factory Default
procedure may take a few seconds.
L
E
R
E
C
E
OPERATING THE RECEIVER
I
V
E
R
GB-25