Intensive Drying; Cycle Completion Signal; Auto Power Off; To Change Language - Bosch Dishwasher Operating Instructions Manual

Hide thumbs Also See for Dishwasher:
Table of Contents

Advertisement

Available languages

Available languages

Cycle Completion Signal

Open the door and press the [On/Off] button.
1
Hold down the "A" button (see page 4) and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
Press the "A" button until the display shows "b:02".
4
Press the "C" button to increase or decrease the tone "b:00" = OFF and "b:03" = LOUDEST
5
Press [Start] to save setting and close the door.
6

Intensive Drying

The final rinse uses a higher temperature which improves the drying results. The running time may increase slightly.
To turn intensive drying on:
Open the door and press the [On/Off] button.
1
Hold down the "A" button (see page 4) and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
Press the "A" button until the display shows "d:00".
4
Press the "C" button to turn intensive drying on or off. "d:01" = ON and "d:00" = OFF
5
Press [Start] to save setting and close the door.
6

Auto Power Off

To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the factory setting (P:01):
Open the door and press the [On/Off] button.
1
Hold down the "A" button and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
Press the "A" button until the display indicates "P:01".
4
Press the "C" button until the display corresponds with your requirements.
5
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
Press [Start] to save the setting and close the door.
6
To change the language:
Open the door and press the [On/Off] button.
1
Hold down the "A" button and press [Start] until the display indicates "H:00".
2
Release both buttons.
3
Press the "A" button until the display indicates "L:01".
4
Press the "C" button until the display corresponds with your requirements.
5
L:02 = English
L:03 = French
L:07 = Spanish
Press [Start] to save the setting and close the door.
6
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents