USING YOUR ROBO.COM² CLEANER
Setting up the Cleaning Schedule*
The Robo.com² can be programmed to automatically clean each day or on specific days as desired.
Once set up this will occur at the same time on each day specified. To set up a cleaning schedule over
one week complete the following:
1.
Press the Scheduling Function button on the Remote Control**. A flashing box will appear around
M (Monday).
2.
Use the up and down arrow keys to select the desired day and then press the OK Confirmation
Button to confirm that day. You can also choose multiple days (up to 7 days).
3.
Once each day of the week have been selected, you can decide the hour of the cleaning schedule:
the hour will start flashing on the display. Use the up and down arrow keys to select the desired
hour. Press the OK Confirmation Button.
4.
The minute display will flash, use the up and down arrow keys to select the desired minute. Press
the OK Confirmation Button.
5.
The cleaning schedule for the days has been selected.
This bar below
the letter of the
day indicates the
'Current day'
NOTE: The cleaning hour will be the same each day scheduled for cleaning.
Additional Features
Automatic Return to
the Charger
Base Station:
UV Lamp*:
Floor Polisher Pad*:
* Certain Models Only
** May vary according to model
robo_com2 IM Australia.indd 9
Press the
Sensitive touch control on the robot or press the
on the remote control, this will activate the Automatic Return to the Charger
Base Station.
Press the UV button on the remote control** to activate the UV lamp* for
more hygienic cleaning. The UV indicator will light on in the LCD display. To
deactivate the UV lamp*, just repress the UV button on the remote control**.
Attached via the Floor Polisher Pad Holder * to the underside of the cleaner,
the Floor Polisher Pad* is used to polish marble, parquet, wooden and other
delicate flooring.
NOTE: Do not use on a carpeted surface.
The fixed box around
the letter of the
day indicates that
day has a cleaning
schedule set.
button
7/19/2012 4:22:19 PM