Canon EOS 5D Mark III Instruction Manual page 208

3 Menu Function Settings
Silent LV shootingN
• Mode 1
The shooting operation noise is quieter than with normal shooting.
Continuous shooting is also possible. If <o> is set, you can
shoot at a maximum continuous shooting speed of approx. 6 fps.
• Mode 2
When the shutter button is pressed completely, only one shot will be
taken. While you keep holding down the shutter button, the camera
operation will be suspended. Then when you return to the shutter
button's halfway position, the camera operation will resume. The
shooting noise is thereby minimized. Even if continuous shooting is
set, only a single shot will be taken.
• Disable
Be sure to set it to [Disable] if you use a TS-E lens (other than
those listed in
use an Extension tube. Setting it to [Mode 1] or [Mode 2] will result
in incorrect or irregular exposures.
If you use flash, silent shooting will not be possible regardless of the
[Silent LV shoot.] setting.
When using a non-Canon flash unit, set it to [Disable]. The flash will not
fire if it is set to [Mode 1] or [Mode 2].
If [Mode 2] is set and you use remote control shooting (p.188), the
operation will be the same as with [Mode 1].
With the TS-E 17mm f/4L or TS-E 24mm f/3.5L II lens, you can use [Mode 1]
or [Mode 2].
Metering timerN
You can change how long the exposure setting is displayed (AE lock
time).
If you select [z3: Dust Delete Data], [53: Sensor cleaning], [54: Clear
all camera settings], or [54: Firmware Ver.], the Live View shooting will be
terminated.
208
below) for shifting or tilting the lens or if you