Sony KP-57WV600 Operating Instructions Manual page 18

Can accommodate a copy-protected digital connection (HDCP*) to other devices
(such
as digital set-top boxes) that have compatible interfaces. The DVI-HDTV
input
terminal is
compliant with the EIA-861 standard and js not intended
for
use
with personal computers. See the instruction manual that came with your
equipment for details about connecting and using it with the TV.
Connects to the 5 VIDEO OUT jack of your VCR or other video equipment that
has
5 VIDEO. S
VIDEO provides better picture cluality than either composite video ([g)
or
VHF/L HF (a) connections.
Connect to the composite A/V output jacks on your VCR or other video
component. A fourth component A/V input jack (VIDEO 2) is located on the front
panel of the TV. These
video
connections provide better picture quality than the
VHF/UHF (NJ, connections.
Lets you record the program you are watching to a VCR. When two VCRs are
connected, you can use the TV as a monitor for tape-to-tape editing (not available
with 48Op, 72Op, or 108Oi when the input is set to VIDEO 5-7).
Connects to the left and right audio input jacks of your
audio
or video equipment.
You can use these outputs to listen to your TV's audio through your stereo
system.
Connect to
yctur
DVD player's or digital set-top box's component video (Y, PB,
fR)
and audio (L/R) jacks. Component
video provides better picture quality than a,
pj, or @J).
Auxiliary RF input that connects io your antenna, CATV cable, or cable box output
jack. This is
convenient il you
are using two VEIF/ UHF sources (antenna, CATV
cable, or cable box). For details, see pages 20 to 23.
Connects to your cable box input jack. This VHF/UHF output jack lets you set up
your TV to switch between scrambled channels (coming through a cable box) and
unscrambled cable channels. I.Jse this jack
instead
of a splitter to get better picture
qiuality when
you
need to switch between scrambled and unscrambled cable
channels. For details, see pages 22 to 23.
Primary RF inpllt i-hat connects to your VHF/I.JI-IF antenna or cable.
Allows
the TV to receive (IN) and send (OUT) remote control signals to other Sony
infrared-E:ol~trollccl audio or video equipment that has the CONTROL § Function.