Nokia 7360 Service Manual page 16

CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
33. Remove the SIM-GRIP from the B-COVER ASSY.
35. Use tweezers to remove the POWER KEY ACTUATOR including
the POWER KEY. Both items can be disassembled if necessary.
37. Use the dental tool to open both snaps. Be careful not to
damage the snaps. A click noise is audible if the snaps open.
39. Use the dental tool to remove the adhered IHF SPEAKER.
assembling not the guide pin.
ADHESIVE when assembling.
Service Manual 7360 RM-127
Use always a new IHF SPEAKER
Page 16
(26)
CONFIDENTIAL
34. Hold the POWER KEY depressed and use a slotted screwdriver
to lever it over the marked position (yellow finger).
36. Note the two snaps of the IHF LID ASSY.
38. Use the SRT-6 to remove the IHF LID ASSY.
For
40. Place the ENGINE MODULE into the module jig. Use a
slotted screwdriver as a lever to open the CAMERA SHIELD.
assembling note the guide pin.
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
21.11.2005
For