Table of Contents
Advertisement
If IP Filters is selected in the Filter Type field, the screen appears as below.
This page enables you to define a minimum and maximum IP address range filter; all IP addresses falling
in the range are not allowed Internet access. The IP filter profiles are listed in the table at the bottom of
the page.
Note: When selecting items in the table at the bottom, click anywhere in the item. The line is
selected, and the fields automatically load the item' s parameters, which you can edit.
Enable: Click to enable or disable the IP address filter.
Range Start: Type the minimum address for the IP range. IP addresses falling between this value and
the Range End are not allowed to access the Internet.
Range End: Type the minimum address for the IP range. IP addresses falling between this value and the
Range Start are not allowed to access the Internet.
Add: Click to add the IP range to the table at the bottom of the screen.
Update: Click to update information for the range if you have selected a list item and have made
changes.
Delete: Select a list item and click "Delete" to remove the item from the list.
Clear: Click "Clear" to erase all fields and enter new information.
Select Domain Blocking, and the following screen appear.
- 24 -
Advertisement
Table of Contents
