Repeated Playback (Repeat Mode); To Repeat Only The Desired Tracks; To Repeat One Selected Disc - Kenwood DPF-J5020 Instruction Manual

Repeated playback
18
Preparation
÷ Load discs in the carousel.

To repeat only the desired tracks

1 Program the desired tracks by performing steps 1
to 3 of "Programming tracks in desired order".
2 Switch REPEAT ON.
3 Start playback.

To repeat one selected disc

1 Check that the unit is in the normal play TRACK
mode.
2 Select the disc number.
Within 8 seconds!
3 Start playback.
4 Switch REPEAT ON.
For random repetition
For music type or user file repetition
For best selection repetition
(REPEAT mode)
REPEAT
E
ENTER
6
DISC SKIP
DOWN UP
Previous disc Next disc
ENTER
6
REPEAT
E
0
÷ Up to 32 tracks can be programmed by repeating steps 1.
^
P G
÷ The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
#
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
P G
÷ The current status is displayed when the key is pressed once. When it
is pressed while the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON
(
∞
•
Programming tracks in desired order (PGM mode)
R E P E A T 2 O N
R E P E A T 2 O N
DPF-J5020 (En)
D T 3 0
OFF)
D T 3 0
OFF)