Normal Play (Track Mode); Playing Tracks In Order From Track No.1 - Kenwood DP-4090 Instruction Manual

Normal play (TRACK mode)

Use the following procedure to play a CD in the original order
of tracks from track No. 1.
10
Playing tracks in order from track No. 1
1
Press the POWER switch to ON.
2
Load a disc.
1
2
3
3
Start playback.
To pause playback
÷ Each press pauses and plays the CD alternately.
POWER
- –
ON OFF
Open the door.
0
Place a disc.
Label side
Disc tray
Close the door.
0
6
6 0
Lights up.
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
÷ Playback starts when a disc has been loaded.
÷ Do not touch the played side of disc.
÷ Loading two discs together will cause malfunctioning.
÷ Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷ A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
÷ In the case of a CD-TEXT disc, the disc's title is scrolled on the display.
Lights up.
0 1
Track NO. being played
÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display.
What is then displayed is in accordance with the TEXT DISPLAY mode.
To stop playback
1
DP-5090/4090 (En)
COMPACT DISC PLAYER DP-5090
C O L S E •
1 : 2
Elapsed time of track being played
7
3
#