Programming Pads - Daewoo KOM-9F85 Operating Instructions Manual

Programming Pads

To change the amount of time or the power level for a preprogrammed pad.
1. Open the door.
• Display turns off.
2. Press and hold POWER LEVEL pad for a while.
• When the oven enters Programming mode, it will show
"PROGRAM" in the display.
3. Press number pads to be programmed.
• It will show a program number in the display.
• For single digit entry, press only one number pad.
• For multiple digit entry, press from one to three pads one by one.
4. Press POWER LEVEL pad to select a desired power level.
• If "HI" shows in the display, the power level is adjusted to full power.
• The % indicator will light if a lower power level is adjusted.
• You can change a power level to adjust desired setting by pressing
POWER LEVEL pad repeatedly.
5. Enter desired cooking time by using number pads.
6. If stage cooking is desired, repeat step 4 and 5.
• Display changes to cook time and power level for the next stage.
• Up to three different stages can be programmed.
7. Press START pad to save the program changes.
• To discard changes, press STOP pad.
13