Device Description - Beurer BM 58 Instruction Manual

4. Device description

1
2
1. Cuff tube
2. Cuff
3. Cuff connector
4. Touch screen activation
switch
5. USB interface
6. Cuff holder
7. Cuff connector port (left side)
8. Memory button MEM
9. START/STOP button
10. AC adapter port
11. Display
4
3
11
7
8
MEM
4
12. USB connection cable
13. AC Adapter
10
Touch screen activation
9
switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to OFF when the device is not
in use. To operate the device, move the touch screen activa-
tion switch to ON. When the touch screen display is touched
5
(START/STOP button or MEM button), a beep is output.
Tip: You can switch off the device at any time by setting the
6
touch screen activation switch to the OFF position.
Cuff holder
Thanks to the cuff holder on the underside of the device,
you have the option of conveniently storing the cuff. To do
so, push out the cuff holder with both thumbs until it locks
into place (see also Chapter: Inserting/Replacing batteries).
11
12
13