Tuner Features; Tuning - Kenwood KRC-308S Instruction Manual

Tuner features

B NR SCAN B.S/RDM
LOUD
#1~6
indicator
Band display
Frequency
ST indicator
4
SRC FM/CRSC
EJECT
A.ADJ
SRC
PWR
OFF CRSC
DISC
REP
D.SCN MTL/M.RDM DISC
AUTO CLK
AME ADJ
AUTO/AME
AM
Preset station number
AUTO indicator

Tuning

¢
You can choose between auto seek tuning of receivable
frequencies and manual tuning.
1
Press the SRC (source) button repeatedly to select the tuner
mode. "TUnE" is displayed when the tuner mode has been
selected.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between FM1, FM2, and FM3 (which are used for groups of
preset stations).
Press the AM button to select the AM band.
3
Press the AUTO button to switch between auto seek tuning
and manual tuning.
The AUTO indicator lights up only when auto seek tuning is
selected.
4
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
The ST indicator lights up when stereo broadcasts are being
received.
— 9 —