Kenwood KDV-C810 Instruction Manual page 38

Troubleshooting Guide
The messages shown below display your systems
condition.
E-01:EJECT: No disc magazine has been loaded. The disc
magazine is not completely loaded.
➪
Load the disc magazine properly.
NO DISC: No disc has been loaded in the disc magazine.
➪
Load a disc into the disc magazine.
E-04: The Disc is quite dirty. The Disc is upside-down. The
Disc is scratched a lot.
➪
Clean the Disc and load it correctly.
E-15: • The disc cannot be played because of its
unacceptable format.
• A disc that cannot be read is set.
➪
Use another disc.
A file with unacceptable format is included.
E-99: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.
➪
Check the disc magazine. And then press the reset
button on the unit. If the "E-99" code does not
disappear, consult your nearest service center.
NO NAME: Attempted to display DNPS during the CD play having
no disc names preset.
NO ACCESS: No playback has been performed after the disc
was set into the disc changer.
WRONG REGION!!: The DVD software encoded for other region
code.
E01
E02
E99
E51
— 38 —