D-Link AirPremier DWL-G680 Manual page 10

Getting Started (continued)
Setting up a Wireless Infrastructure Network
7
Please remember that D-Link AirPremier
pre-configured to connect together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router (see the Quick
Installation Guide included with your router.)
If you are connecting a desktop computer to your networks, you can install the
D-Link AirPremier
the Quick Installation Guide included with the DWL-G550.)
Install the D-Link AirPremier
computer.
(See the Quick Installation Guide included with the DWL-G680.)
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-530TX+) to the router also.
A RADIUS Server is optional. Connect a RADIUS Server to your network to use
all the features of WPA/WPA2. (Without a RADIUS Server you can still use the
WPA/WPA2 Pre-Shared Key mode.) RADIUS Authentication can also be
provided by another service provider over the Internet and remote to your network
site.
2
6
®
DWL-G550 Wireless Cardbus Adapter into a computer. (See
®
DWL-G680 Wireless Cardbus Adapter into a laptop
1
3
DWL-G550
DWL-G680
5
® wireless devices are
4
10