Feature
Cause
Power Anode
•
Indicator lamp is
•
Anodes not making
red
contact with the
water
•
Break in one of the
cables
•
Anode poorly
earthed
•
Indicator lamp is off No electrical supply to
the potentiostat
11.4 CHA Troubleshooting table - no hot water
Warning
Maintenance may only be performed by a qualified service and maintenance engineer.
Measure
3. Check to see that all connections have been made properly
4. Check that the Power Anode is properly connected; see
Electrical Diagram
(14 "Electrical
diagram").
5. Check to see that all connections have been made properly
6. Check all cables for breaks and replace if any are found.
Check the electrical supply
Comment
If the error cannot be rectified, contact your installation engineer